Engineering Section is the most developed section of the iDEES. This section does so so many things in the piping engineering activities and also in other disciplines.
Engineering Section in iDEES allows you to monitor and manage the progress throughout the life cycle of a Engineering . Engineering Section comes in handy when trying to control large projects. In addition, you can expect to improve team productivity and collaboration, optimize correspondence, manage and control Documents between all team members, identify problems, and manage your man-hours and vendors data, for an efficient cost and materials management, to be able to scale to any size projects.
Need to control projects and resources better? Are projects consistently late and costing more money than anticipated? Engineering Section may be the solution for you.
Borna iDEES is proud to introduce its Engineering Section Suite – the next generation of high-level information management and Engineering management software solutions for today’s corporations in the Engineering Industry specially in Piping department. Improve your organization’s productivity. Get projects done more quickly and intelligently.
A strong research and development, and a network of consultants and experiences in oil, gas, petrochemical and steel projects, support Borna iDEES' Engineering Management Software Solutions.
Engineering Main Solutions
Engineering section main solutions are the progress measurement via task management for 6 major lists in any Engineering activity. List of these six lists are as follows:
Piping Line Details Form is a form to see all information about Line Numbers that exist in iDEES like Line List data, Task history, Isometrics history, and Overview of tasks for each line.
A very important non-deliverable activity in the project is transferring Piping Classes from PMS(Piping Material Specification) into the 3D modeler software like AVEVA PDMS/E3D. This is a time-consuming activity and it must be controlled with tasks and progress measurement process. So this form will be very useful to manage this activity.
This form is completely the same as 'Piping Line Details Form' except the 'Iso Index Page' because this page is not applicable for piping classes at all. All fields here are from some projects Piping Class Index or Piping Material Specification (PMS).
Engineering Sub Solutions
Engineering section has so many independent tools which can be work alone in any Engineering discipline. They are sometimes so complicated and powerful and sometimes very simple but helpful. List of some of these sub solutions are as follows:
Missed Components are detected when designers are busy on 3D model. When they are modeling piping line numbers from P&ID, sometimes they may face with a component which is not exist in the database of 3D software (PDMS or PDS,...) to select. So they need to report that component as Missed Component to Material section for review and implementing in the Spec & Catalogue of 3D software.
Common Procedures can be any internal agreements between users and Lead or any procedures that Lead wants to be available fast by all users everywhere in the project. By using this form, all users can see a unique place to see all agreements and procedures.
Master documents are the base or main documents which all piping or other discipline personnels refers to them for their works. In some companies, there is independent Document Control software to control all reviews and comments, but in some other companies there is not such software.
The another problematic matter in the piping department is generating bill of materials of pipe supports. There are normally two kind of supports in the plant, one is Standard support and another is Special support.
NavisWorks Integrator is a unique tool to create some useful data for using in the AutoDesk NavisWorks beside the 3D file. This data contains 'Line List', 'Equipment List', 'IsoIndex list' and also progress data. This data can be transferred with 3D model (RVM) or can be embedded in the 3D model with *.nwd format of NavisWorks
AutoCad Integration form contains some useful independent tools for the AutoCAD software drawings.
This for contains three separate types of activities on the AutoCAD Drawings as follows:
Extract & Convert
Insert & Erase
Batch Plot/PDF Maker
This is a useful tool to record and save all history of meetings. In so many companies there is a Document Control Center (DCC) which is responsible for recording minutes of meetings but in so many others there is not such tool.
In this tool there is field for any type of attachment so user can attached any evidence or document or scan image for the related MOM.
This is a useful tool to record and save all history of changes & claims. In so many companies there is a section inside the project control team which is responsible for recording changes & claims but in so many others there is not such tool.
In this tool there is field for any type of attachment so user can attached any evidence or document or scan image for the related changes & claims.
Tender MTO is so helpful in tenders, when companies would like to participate in tenders and need to generate some MTO's from scratch, this tool can be very helpful with a variety aspects.
iDEES Extra Tools include some useful tools for some general aims. These tools have usage in all offices with any application like engineering offices in any industry.